1993 Ford Ranger SuperCab "tyranny" Questions

...a few choices, 1.: Get by as long as possible as is... 2. Get it repaired (that means remove the tyranny, break it down and replace the worn syncros) 3. Replace the tyranny with a good used one. ...

I have a 2000 Eclipse and the tyranny is going into Limp Mode or Safe Mode. When I take off from a stop it shifts into 3rd gear and will not up shift or down shift. A Mitsubishi dealer in Greenwood.In

Trying to put a front tranny seal in I hope you have some help and a floor jack. tyranny jack would be better. pull the tyranny, pull the torque converter and pull the seal. be careful and don't get ...

...then someways will not has a code that refers to air purifier? Any have a clue where I can start tyranny shop says it's a engine code not tyranny for better result download the pdf file Mitsubishi ...

I recently added tyranny fluid to my 91 Honda prelude.. when mabey I didn't need to. Then the other day my tranny starts slipping ..I got stuck and had to push it home ..when I pulled the dipstick out

...till 30mph then it good fast and strong. When I put it in reverse I have the same hesitation too . Tyranny seems to engage slow at first. I had tyranny fluid and new filter installed. Put new speed ...

...it on hard pavement for a ways with it making lots of noises you may have broken the case for the tyranny or transfer case. It is never good to operate a vehicle when it is not preforming as ...

...converter out to a transmission shop and ask them if it's good and if it will work, if the used tyranny does not come with one the pump has to be the right size of input shaft and pump shaft you ...

...1999 dodge ram 1500 won't shift in first gear it's a automatic what could it be? I added a quart of tyranny fluid but it was synthetic would that be a problem? My 1999 dodge ram 1500 won't shift ...

i have 99 vw jet ta it give me code p0730 tyranny not shifting properly. Just replaced my tyranny with used one? No, do not replace your transmission, the G68 sensor is not reading correctly, (input ...