2005 Dodge Neon "valve bodys" Questions

removing the valve body on a transmission on a 1998 plymouth neon I have a 1998 plymouth neon with a 3 speed automatic transmission, I am having trouble removing the valve body on the transmission to ...

How to remove the Valve Body on a 31th Transaxle 3 Speed I'm trying to change the Solenoid on the side of the valve body Drop the trans panfirst thing you see is the valve body there are ...

where do the check balls get placed in the valve body of transmission? I have the valve body apart and need to know where these little steel balls get placed inside the valve body to make sure it is ...

My 2003 Dodge Neon will idle low on and off and the idle is a little rough. I have a new pcv valve, new air filter, new spark plugs and wires, new timing belt. have you checked the idle control motor ...

...body to remove any build-up inside. If everything is good then remove the IAC (idle air control valve from the backside of throttle body) to check for carbon bild up and possible faulty

...a week, i have serviced everything could this be the throttle position sensor or the air intake valve?? help... Is it stalling at idle, or while driving? Have you performed a Throttle Body

...how to replace the Tcc switch on my 1996 Dodge Neon. It is a 3 speed automatic. Need to remove the valve body from the transaxle. The solenoid is mounted to the valve body. Follow the 2 wire ...

... The engine computer controls idle speed by an "actuator" called an IAC -idle air control -motor or valve. It sits right on the throttle body where the air hose, the big boot, connects to the top of ...

...recently rebuilt this transmission. All the internal components have been changed including the valve body, lockup solenoid and the governor. When I first rebuilt transmission it ran and operated ...

...just like it is in nutral. There may be an internal leakage because of a dried up gasket on the valve body. Other seals and orings if dried out can break after so many cycles and fail under ...