2004 Ford Focus "pcv valve replaced" Questions

...pcv valve on 03 ford focus where would i locate the pcv valve on an 03 ford focus? by popping the hood or jacking the car and looking underneath? and where specifically is this piece? ...

PCV valve and the hose that attaches to it. This PCV valvle is usually located on top of your valve cover and usually have a 90 bend in it. I would replace the valve and check the hose for any cracks.

pcv valve location can someone tell me where the pcv valve is on my 2000 focus 16 valve? Thanks it doesnt have a replacable one

PCV valve 3. inspected the PCV hose and connectors (nothing wrong) 4. ran a tank of gas with fuel injector cleaner 5. tested the EGR valve by pulling the vacuum hose off the top, and blocking the hose

...How can I replace PCV valve hose on without removing intake manifold? Sprayed pcv hose idles right FORD FOCUS SERVICE REPAIR MANUAL 2000 2007 DOWNLOAD for the easy solution download the pdf ...

...to pcv valve. Check while running, they will collapse and leak I had the same problem. So that you don't nickel and dime to death, replace the Throttle Position Sensor. Costs less than 35

...PCV valve. See if you can locate the source of the whistle with the hood up. The PCV valve could have popped out of the valve cover. Check vacuum lines where they attach to the intake. When is the ...

...lurches as I accelorate Sounds like you may have a clogged EGR hose or valve. Make sure you've replace the air filter and PCV valve first as these will also have an adverse affect if they are

...check for vacuum leaks first by sparaying carb cleaner on the intake and all vacuum lines. then check pcv valve to see if its stuck open. then try replacing the idle control valve. hope this

SE SOHC remove and clean the idle sensor valve. pull out and clean the PCV valve (on top of the valve cover).blow out (from the inside) the air filter. do not apply gas until after your vehicle starts