2002 Ford Ranger Regular Cab "new rear differential" Questions

Ad

Question about Ford Ranger

1 Answer

...rear diff is sealed and should never be checked or changed. Who's right. I bought the truck new with the understanding that nothing needs doing til 110,000 miles. I've changed oil, fuel and air ...

Ad

...new rear pads and new rotation sencer Change the sensor that is on top of the rear differential...You probaly can take it out and clean it and disconnect the battery, and test drive, and it might go ...

Ad

...70-85 ft lb Ring gear bolts 70-85 ft lb Pinion bearing preload if using original bearings 8-14 lb-in, if installing new bearings 16-28 lb-in The rear end axle nut torque ratio for a 2018 Jeep ...

Question about Ford Ranger

1 Answer

...rear cover of the differential. Remove the cover and let the gear oil drain out. You may have to move the break line to remove the cover. When the oil has drained out turn the drive shaft until you ...

...new rear end. I provided the wheel bearings and seals to the shop, and they provided the carrier bearing, lube, and labor. While the axles are out, check the surface where the axles ride on the ...

...rear differential. The length of the new drive shaft allowed me to adjust almost 3/4" so all I had to do was get it close. I also took close up pictures so the shop could match up the correct flange ...

Question about Ford Ranger

2 Answers

...new front and rear driveshafts and still have the problem ,any suggestions are very much welcomed Hi, Could either be wheel balancing problem or your universal joints needs replacement. The U-joints ...

...new gear oil? Rear differential will not fill with new gear oil? is plug open on top the right one? differential level plug should be about half way or middle of diff fill till it gets to that ...

...rear diff where the drive shaft hooks into the differential plate. It appears there is a plastic lipped washer and the fluid is coming from there. I believe its a pinon seal problem. I called two ...

Question about Ford Ranger

4 Answers

new one on if its loose then a replacement is needed if just bolts loose then just tighten back the bolts use a little thread locker not the permanent thread locker This item if I am thinking right is

Not finding what you are looking for?
2002 Ford Ranger Regular Cab Logo

624 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...