2001 Ford Ranger Regular Cab "clutch pedal position switch fuse" Questions

Ad

Question about Ford Ranger

1 Answer

...Clutch Pedal Position (CPP) switch, Starter Interrupt Relay 25 ? Not Used 26 10A Battery Saver Relay, Auxillary Relay Box, Restraint Central Module (RCM), Generic Electroic Module (GEM), Instrument ...

Ad

...relay , new clutch pedal sensor,new positive cables to battery and starter ,and new ignition switch on 1994 Ford ranger 2.3 and took ignition control switch but no crank or low volts on dash ...

Ad

...clutch pedal diagram for a 1999 s10 2.2 4cyl manual trans Clutch pedal broke Sorry no diagram. But here is how it works. In the start position(Power) the wire goes to the start fuse, from the fuse it ...

...clutch pedal all the way to the floor and then return it back 0.4-1.1 in. along its travel from the floor. Connect an ohmmeter to the switch and slowly screw the switch in until the switch is ON . ...

Question about Ford Ranger

1 Answer

...If it has a clutch make sure the pedal is depressed and check the clutch switch on the pedal. If Automatic Check neutral safety switch and adjustment. make sure the key is on when testing the

clutch pedal position switch Visual Inspection Chart Mechanical Electrical Speed control cable Speed control cable not attached to throttle Central junction box (CJB) fuse(s): 5 (15A) 13 (20A) 15 (5A)

...clutch pedal position (CPP) switch or jumper deactivator switch speed control actuator switches speed control servo speed control actuator cable speed control indicator brush assembly (Motorhome ...

...clutch pedal switch is bad??? do you mean it will not crank, if it dont crank over at about 300 rpm it will never start. no the clutch switch only blocks, cranking. Clutch pedal switch is a ...

...clutch pedal is fully depressed. After this has been verified the ECM then supplies 12 volts to the control circuit of the CRANK relay closing the CRANK relay switch circuit and allowing battery ...

...neutral switch is the problem. If the car is a manual, there is a switch on the clutch pedal. Try to push the clutch a little farther than usual. If it starts then, that switch is out of

Not finding what you are looking for?
2001 Ford Ranger Regular Cab Logo

747 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...