1992 Ford Explorer "replace spark plugs 5" Questions

replace the wires and spark plugs. I did that one at time to ensure I didn't get the wires crossed and the performance is worse. Hope this helps. The ignition coil: changes low-voltage pulses from the

...Spark should be the color of lightening, BRIGHT BLUE-WHITE. if not, then replace the plugs, ALL of them, in the car. Probably should do this anyway. Plugs go bad after awhile, and replacing them is ...

spark , replace wire's, if you do have spark at all wire's check injector for clicking sound, if o.k, do a cylinder compression test. 8 cylinder has two coil pack's do same test as above.Hope this was

spark plugs and tell them the make model and year of your car. if youre trying to replace them yourself, follow the wires to the side of the engine, unplug them from the plug, and use a socket wrench

replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In

...the plug, but cylender is not firing causing a dead miss...what could be the problem (none of the other 5 seem to have an issue) thanks, larryb If the spark plug wires are good, replace the coil

...replace spark plugs, wiring & coil, for $900. Only studders when quickly accelerating above 40mph. I've check other forums, they say to clean the Mass Air Flow sensor. Haven't tried it yet. This ...

misfire 2&5 cyl. Replace all the spark plugs and wires this should take care of it if it .

...plugs and wires on a 94 ford explorer and now it 's not tunning right. need a diagram. please. FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for ...

spark plug, REPLACE if necessary. GO to Z1. KEY OFF. REPLACE coil. INSPECT spark plug, REPLACE if necessary. COMPLETE Misfire Monitor Repair Verification Drive Cycle (REFER to Section 2, Drive Cycles)