2004 Ford Ranger "spark plug gap" Questions

Ad

...spark plug gap on it? It depends on the spark plugs that have been used. Some are pre gapped, some have three preset side electrodes around the edge. Gapping spark plugs is not as critical as the old ...

Ad

Question about Ford Ranger

1 Answer

spark plug gap 1991 2.3 ltr spark plug gap? Hi original spark plugs ( MOTORCRAFT AGPS22PP1 1.0mm gap you can use ( CHAMPION RC8PCY 0.8mm gap or ( NGK PFR6B-II 1.1mm gap Note that the specs given are ...

Ad

Question about Ford Ranger

2 Answers

...spark plug gap on a 1995 ford ranger 4 cylinder? Hi!1 The spark plug gap is 044 (In thousandths of an inch) Caution! Gap is not adjustable on certain plug brands. The 4 cyl. 2.3 L engine uses 2 spark ...

...spark plug, bad spark plug wire, or excessive carbon build-up on the valves and pistons etc. Make sure all fluid levels are where they should be. Try replacing the spark plugs and wires. Look in your ...

Question about Ford Ranger

2 Answers

the spark plugs typically between 30 thousants and 60 thousands of an inch. that is the distance between the l shaped piece ofsteel and the piece comig from the middle of the plug. Spark plug gap .044

spark plug gap spec. for 1997 ford ranger/4.0 liter need spark plug gap spec for 1997 ford ranger 4.0 liter for the most part it is under the hood of your car where the sticker say engine size try ...

Question about Ford Ranger

1 Answer

spark plug wire and remove the old spark plug with a spark plug socket. Turn it counter clockwise. Pull it out and put the new spark plug in and firmly tighten it, dont over do it though you dont want

...spark plug gap for a 1996 Ford Ranger 3.0? When purchasing the plugs I was informed it was .44. but I am getting a slight back fire when engine is running. 0.042-0.046 is the correct gap for your ...

Question about Ford Ranger

1 Answer

Spark plug gap specification Spark plug 42 degrees Celsius... Gap is .042 to .046 .....

Question about Ford Ranger

2 Answers

...plug or spark gap. check plug for burning on electrode. check gap. if you replace 1 then replace them all. 2) check wires for any white lines. mainly around the boots, but check it all. the white ...

Not finding what you are looking for?
2004 Ford Ranger Logo

765 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...