1998 Ford Contour "fender" Questions

...it? Follow the positive battery cable to the starter relay. It is mounted on the driver's side fender. Disconnect the battery first to be safe, then simply unbolt the cables from the defective ...

firing order 4 cylinder is 1-3-4-2 6 cylinder (3.0L) is 1-4-2-5-3-6 1 is closest to passenger fender at fire wall.

diagram for a 1998 ford contour serpentine belt There should be one under the hood look good on the fenders also and front on top of radiator

...a bit... Thanks for taking the time to reply Ian you'll pass it through the opening in the inner fender and set it on the control arm. then you can grab it from the top of the filter and lift it ...

...do i remove the altenator for a 1998 Mercury Mystic 4 cyl That back bolt won't clear the firewall/fender the other guys i right, how ever it is not that simple.... the dog bone is the funny looking ...

...around the alternator. Raise and support the vehicle. Remove the passenger side front wheel and fender well splash guard. Disconnect the passenger side outer tie rod end from the spindle. See . ...

serpentine belt diagrams Look at the label in the engine compartment (on radiator, fender, near fan shroud). This link will take you to a sketch of the belt routing ...

...block.. open it and you will see rows of fuses and relays, stand facing the drivers front fender... the row closest to the engine and closest to the front of the car is the ...

...Check the belt (it's on the right, or passenger, side of the engine, between the engine and the fender) and replace it if needed. Also, check all the pulleys that it gos over to make sure they ...

...just water. water will cause it to over heat. there is a over flow tank on the passeger side front fender check the ...