valve engine. I just replaced the water pump, timing belt, and head gasket in my car; while I was having my head resurfaced. Every thing was fine for a few minutes, then there was extreme lifter noise
valve clearance we just replace engine in 97 chevy malibu v-6 3.1. Can't seem to get the valves adjusted correctly. This is the only thing left holding us up. Can't find the answer anywhere. these are
...you would need to check the following two things: 1. Re-check and confirm the valve timing by removing the valve cover. Follow the manufacturer's recommendations. 2. Re-check the valve
...ENGINE OIL, REPLACE ENGINE OIL FILTER, REPLACE MANUAL TRANSAXLE FLUID, REPLACE SPARK PLUGS, REPLACE TIMING BELT If it is an In-Line4 OPERATION COMPONENT INSPECT VALVE CLEARANCE, REPLACE BALANCER
try to check the timing belt and also check the valve check the clearance and also change the oil seal to insure there will be no loose compression.And check the tension wire and the distribution cap
...valve cover. This allows you to also wiggle the engine some too. It took some doing and you need to pay close attention to not crush the exposed brake lines mounted against the subframe. The car also ...
...replace it if it is very dirty - if you think it is blocked try running the engine without the filter and see if it runs better, you know for sure you have a bad filter if this is the case. 4- check ...
...replace the timing chain of nissan cefiro v6 2000? its 97 model. Engine - Timing Chain/Front Cover Revised Procedure Classification: EM98-009 Reference: NTB98-107 Date: January 15, 1999 GA16DE TIMING ...
138 questions posted
Usually answered in minutes!
235 Questions
215 Questions
166 Questions
158 Questions
87 Questions