1989 Ford Bronco II "starter spinning" Questions

starter spinning, the solenoid is 6 mo. old, battery connection clean and good, the teeth on the flywheel look and feel good as far as i can see. power is good, it will compression start and run fine.

...starter just spins.. I checked my flywheel it was not too bad but I installed a brand new one anyway and still just spinning..someone please help.. I also have new battery and solenoid is working ...

...starter was spinning but not engaging. I put the truck into nuetral and pushed it backwards a bit and slammed the gear shift into reverse. Did this twice before it actually started. Bought a new ...

cannot move it then you could presume that it is frozen or the gear train is locked up mayby by the starter or some where in the trans area but i dout that Will the starter spin it ? If you don't have

do i need a shim when replacing the starter on a 89" bronco II? starter wasn't engaging ( i could hear it spin but not engage) or made a loud kinda grinding noise after i replaced the starter . I am ...

...3-8 minutes the fual pump will shut off and the truck dies i them try to start it up and the starter sticks in the on position i them haft to disconnect the battey to make it stop i have ...

1990 ford bronco2 starter installed rebuilt starter will not engage sounds like not hitting fly wheel replaced silnoid check outfly teeth ok. ??? If the flywheel teeth are ok, it must not be engaging ...

starter is spinning before fully engaging the flywheel. There is an adjustment and if you are not sure ask a auto electrician how to adjust the pinion adjustment for engagement. If I were committed to

...then it cranks , is this the flywheel? or can i use a replacement ring gear? this could be the starter not engaging Sounds like you missing some teeth, but you need to replace "flex plate" if ...

...in the woods. then got pulled out drove home fine, next day go to start it and click,click,click. starter not spining over. pulled starter off. the bendix was stuck, i figured it would, that