1988 Ford Ranger "driveshaft" Questions

Driveshaft yoke balancer On the driveshaft yoke there is a harmonic balancer type thing that has come loose. If I disconnect the driveshaft and remove the balancer will it effect the Perfomance and ...

We took the driveshaft out of a 1993 Ford ranger 4x4 without marking it now we have a bad vibration. It has a 4.0 motor with a two piece driveshaft. How do we get it fixed Look at the drive shaft and ...

2005 ford ranger 4wd front driveshaft I wanted to know if the front driveshaft on a 2005 ford ranger should be turning even when it is in 2wd? My son has a 1999 ranger and his does not turn when in ...

...to figure the ratio, 1st the tag, which is missing, 2nd mark the bottom of the tire, and mark the driveshaft, move the car forward and count the driveshaft rotations in one complete tire rotation, ...

how does the rear yoke come lose from driveshaft after the 4 bolts are out you should be able compress the driveshaft inward ( into itself ) enough to get it to drop out. ( be very careful with the ...

...U joints and they seemed to be okay. When checking the U joints I noticed I was able to move the driveshaft back and forth in park and neutral. I think it is in the transmission? Am I right! It is ...

...replacing the seal doesn't stop the leak.Inside the tailshaft housing is a bushing that engages the driveshaft yoke.It should be a fairly tight fit when the yoke is installed and the driveshaft is ...

...THIS. 1994 USA BOOKS ONLY HERE. Do not force the oil pump if it does not seat readily. The oil pump driveshaft may be misaligned with the distributor or shaft assembly. If the pump is tightened down ...

can i replace my driveshaft with a used one a year ago I bought a 2003 ranger and noticed that the driveshaft had bored out the bushing knocking it loose and damaging the tailshaft of the trans. so ...

...get my money back or do I need to contact Pay-Pal?? To replace the centre bearing you first remove driveshaft from vehicle. Pull the shaft apart at the middle universal joint. On the back of the ...