1988 Ford Econoline "250 back lights working" Questions

250 its a 98 and it was running fine till about yesterday i was on a job site and i go to start the car to go home and it doesnt start, battery is good, i got my starter tested and it is also good, as

...250 tail lights/running lights relay My tail lights and dash lights stopped working I think it is a fuse or relay. My dash lights are also out all happened at the same time any suggestions? First ...

...250 v-10 instrument and tailights out, cannot find fuse. headlights work, high and low beams, hazards work, blinkers work. Parking lights front and back do not work. Dash lights do not work. check ...

250 wont come out of 4wheel drive seems to be stuck in 4w hi grabbs on sharp turns inside selector works push button 4-wheel drive??? If so maybe the transfer case motor? look on back of transfer case

...headlight switch off and back on and the headlight works fine???? its 2008 is 250 check plug to light for burnt smell ,look ther is a short on left side....with it only messing with one side it must ...

....at the rear end their should be a ground wire bad, broken or cut get back to me. i had the same problem with my 2002 Dodge Ram 1500, the front light control module is bad and its about a $250

...250 tailer towing wiring need color code for ford tailer towing wiring diagram http://www.etrailer.com/faq-wiring.aspx. This has the hcarts to help you. E Trailers .com has all the wiring connectors ...

the towing package 5 prong plug I have turn signal but no parking or brake lights follow the wires back behind the bumper toward the front of the truck, check the next connector you find for corrosion

...250 If the trailer brakes don't come on when you depress the brake pedal, the larger red wire to the back has lost connection. Red to brakes, brown to running lights, green to right turn and brake ...

...lights up, the back up camera works and everthing but I touch it to change stuff and nothing... You will have to change the screen. But before make sure the sensors are still working. Power ...