2003 Ford Focus "clutch hydraulic problems" Questions

clutch hydraulic system is the most likely problem. If bleeding the hydraulics fails to resolve the problem, the clutch master cylinder and the slave cylinder will have to be replaced. These two items

...hydraulic clutch is keeping pressure on the fork and the throw-out bearing (U.S. slang for clutch release bearing?) or thrust bearing is always running against the fingers on the pressure plate, is ...

...hydraulic fluid. you did not seat the clutch properly this you will have to remove the housing use the clutch tool for setting the plate will have to be found and used the break problems somewhere in ...

...hydraulic clutch, but my best guess would be your clutch needs replacing. if the clutch pedal goes to the floor and stays their when you take your foot off the pedal then this indicates are problem ...

? your clutch is auto hydraulic adjust if you could offer more info on 1st gear unable select? it would give a better picture of what may be your problem? at the moment its sound like selector problem

...your pedal is not returning, then you have a clutch problem or your hydraulic clutch system has sprung a leak. There is a master cylinder, a short line, and a slave cylinder, any of which can be

...clutch disc that needs replaced.  If the problem still exists then you either have low fluid/weak hydraulic system, or there is a problem with the syncro that may be adjusted. sounds like you ...

clutch pedal, several times, or until no air comes out, remember to keep fluid resevoir full while bleeding. scott's answer is "jumping the gun" sort of speak you got a hydraulic problem external leak

Problems with my 51plate ford focus estate. Gears will not engage with engine on. When it's off there's no problem so I don't think it's the linkage Checked the clutch and break fluid levels which are

...the gears stick to move and work. Any ideas why this is happening? thanks its possible that your clutch could need bleeding up as it is ...