1990 Ford LTD Crown Victoria "tension pulley" Questions

Ad

Question about Ford Crown Victoria

1 Answer

...tension pulley. Take a socket and ratchet (breaker bar works best) or a wrench and put it on the bolt of the tension pulley. Now you want to tug to the left until the tension on the belt loosens and ...

Ad

Question about Ford Crown Victoria

1 Answer

wen it does the belt brakes from overheating.. i've done 3 over 5 year time. releeve tension on pully and remove belt. remove tthe 1 bolt in middle of pulley.then go in reverse.spray w/good lubricant

Ad

Question about Ford Crown Victoria

1 Answer

belt tensioner release There is a square hole in the tensioner pulley arm.  Use a 1/2" breaker bar inserted into the hole to rotate the tensioner to relieve the tension on the serpentine belt.

...TENSION? HELP!!!! the idle pulley is difficult to adjust on this one i will try to walk you through large bolt on front of pulley loosen about two turn the behind the bracket in which it is mounted ...

...is sticking. it's the one when you're facing the car that's on the left of the alternator. i would get the tension of the serpentine belt checked as if over tight can distort pulley's and wear ...

Question about Ford Crown Victoria

1 Answer

...insert into tensioner pulley where there is a square hole, push until tension makes belt slack and be sure to remember how it comes off for easy install of new belt. Buy a good high quality belt

Question about Ford Crown Victoria

2 Answers

...on the side of the road and i wanted to figure out whats wrong with it. It is possible that your tensioner pulley is seized and will have to be replaced as well. This happened to my 2001 F-150,

Question about Ford Crown Victoria

1 Answer

...pulley fast enough to maintain a proper battery charge. This in turn wears on the battery. Please note that sometimes the belt can be fine and the spring in the tensioner arm can be worn giving ...

Question about Ford Crown Victoria

1 Answer

how to put on a belt Most vehicles have a belt diagram located under the hood...the tensioner pulley is spring loaded and must be pulled up to get the belt on then released to hold the belt tight. ...

Question about Ford Crown Victoria

1 Answer

My motor manuel only shows 1 & it is wrong. There is no routing decal under the hood. The auto tensioner is located on the bottom left between the Crank Case pulley & AC pulley. Thank You Try

Not finding what you are looking for?
1990 Ford LTD Crown Victoria Logo

130 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...