1989 Ford Ranger "1999 rear wheel" Questions

Ad

rear wheels begin to roll on easy take off rear wheel drive prop shaft UJ has gone ,normally the one closest to teh diff goes first and most often Have you checked the grease level in the differential

Ad

...I put jack when changing rear tire Where do I place jack when changing a rear tire 1999 ford ranger xlt Put on e-brake and place jack under rear axle on the side of the wheel as close to it as you ...

Ad

...case lock in. everything sounds good but when you give it gas or put it in a bind it just turns the rear wheels. any ideals will help thanks Sounds like the front wheel hubs are not locking

1999 Ford Ranger with 4 wheel ABS. I replaced the brakes on all four wheels and the rear wheel cylinders. The rear brake lines were open individually for a very brief time, and bled conventionally. I ...

...1999 ford ranger? It won't hold the truck any longer. First pull the plug in the braka adjusting tool and make sure you still have enought shoe left to adjust then follow the cable from the rear ...

1999 ford ran ger is stuck in 4x4 low My ranger extended cab with a 3.0 isstuck in 4x4 low. This switch is turned on and off via a switch on the dash. I have turned that swich on and off as indicated ...

Question about Ford Ranger

1 Answer

...wheel or the frame may be bent,either way driving the truck in this condition will damage the brakes(not the one already damaged)steering and prematurely wear your tires at the very least and could ...

Question about Ford Ranger

2 Answers

rear wheel seal leaking i have a 99 ford ranger with the right rear wheel seal leaking how do i change it Remember SAFETY FIRST. Jack up the right rear wheel, support the axle with a jack stand, ...

...rear I have a 1999 Ford Ranger. I got the truck back in January. During takeoff and only in takeoff, it feels like the rear of the truck jerks a little. Sometime once, sometimes two times. I'm a bit ...

rear wheel, and drum/ brake disk, depending on your vehicles options. after removing the drum or rotor, there should be a wheel cylinder (it has a brake line, usually steel, running into it). you will

Not finding what you are looking for?
Cars & Trucks Logo

671 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...