1989 Ford Bronco "grease steering rack" Questions

...gears would bind from old,hard grease and cause the already thin pot metal rack to break.The steering wheel and the upper column has to come apart to replace the rack,brass gear and the

...steering rack. Reach up from underneath clean and lubricate with fresh grease. This is a common cause of a very sinister noise when turning towards full lock and a much cheaper first step solution ...

...grease to solve an intermittemt ASC problem. This also cleared up the steering issue. get some electrical contact cleaner and some di-electric grease. pop your hood and clean as many electrical ...

...steering rack shaft.6) Apply silicone grease to the outer circumference of the inner tie rod end ball socket, and onto the groove just outside of the socket.7) Apply silicone grease to the inside of ...

...grease the steering column Sorry accidentally postee as a comment. Its the steering rack making noise. You can remove the pinch bolt to the i shaft and rock the steering wheel back and forth to ...

...rolling, i also have a 2002 w/same motor and it steers freely. It could be the steering components are dry of grease or that the power steering pump is defective or the steering rack is

it is hard to steer and resevoir full/no power steering If you have a power steering system, then the pump is shot. If you have rack and pinon, then steer box may need greaseing

will loosen up a bit of grease in the steering rack. If this works it will only resolve the problem for a short while and you will need to add grease down on the rack. the link is not working anymore!

Steering Gear Grease C3AZ-19578-A or equivalent meeting Ford specification ESW-M1C87-A to groove in front wheel spindle tie rod where tie rod bellows clamp to front wheel spindle tie rod and uniformly

...Look for small threaded plugs and remove them and install grease fittings. If that doesn't improve the turn effort you may have a defective power steering pump or a defective steering rack and ...