1989 Ford Bronco "barrel key goes turn" Questions

...key two clicks i think, just before the car starts. underneath the barrel you will notice two little spring loaded pins which you have to push up with a screwdriver so you can wiggle the barrel out. ...

...barrel casing where the key goes. By undoing the casing you'll be able to turn off the engine with a simple flat bladed screwdriver. Ignition barrels arent too expensive to have replaced, the other ...

.... tried turning key around and also wiggling steering wheel Try spraying release oil down the ignition barrel with key inserted, if this fails probably new ignition switch

...key. This has happened in the past but I was able to jiggle the keys and it would eventually turn...it's like it's not identifying my key as the "one". put some oil down the barrel where the key ...

have you had the new key that goes with the new ignition barrel coded to your car?, if not you will have to get the key coded to match your car or the immobilizer wont turn off and the car wont start

...make sure it is the right key and then try turning the steering wheel to either the right or left while trying to turn the key in the ignition.if this does not work have the ignition barrel

small hole upper portion of the ignition barrel then insert a small stick metal in the hole then pull it out the key,goes with the key mechanism then replace it or bring it to the "key duplicator shop

...faulty you could try some spray oil and work the key in the barrel to loosen it up IS YOUR CAR IN THE PARK POSITION? DO YOU HAVE YOUR FOOT ON THE BRAKE. GIVE YOUR STEERING WHEEL A GOOD TURN BOTH

...very small screwdriver into and then the key should fit in to the barrel and release the barrel, if this does not work consult your local dealer, they should be able to point you in the right ...

...cylinder won't turn at all with either key. remote lock works. put some oil down the barrel where the key goes and then pull and push on the steering wheel in case the steering lock has come