1988 Ford Thunderbird "remove starter" Questions

Ad

...remove two or three bolts holding the starter on the transmission 3. Drop the starter through the opening between the firewall and the exhaust 4. Unbolt the battery cable from the starter, and ...

Ad

Question about Ford Thunderbird

2 Answers

...So, what do I do? First check all the cables for tightness and cleanliness. If they are all tight and clean, remove the starter and have it tested at you local auto parts store. replace the

Ad

remove the starter motor assembly so you can inspect the mechanism. I have seen a bad battery cause this many times on fords in the past. You can remove the battery and have it tested at an auto parts

Question about Ford Thunderbird

1 Answer

...make sure to use stands for safety then remove the 2 bolts holding the starter in place and remove the wires from it and then put the new one in but replace the wires b4 u put it all the way ...

...remove the starter use a long flat head screw driver and turn the fly wheel around and make sure that it is still bulted up to the crank shaft the ford 4.6 has a problem with the bults that hold the ...

...1996 ford thunderbird 4.6 ltr engine it is up next to the engine and you can't see it YOU HAVE TO REMOVE STARTER FROM UNDER THE CAR.YOU HAVE TO SAFELY RAISE AND SUPPORT CAR.THEN YOU WILL SEE

Question about Ford Thunderbird

1 Answer

...to me exactly where it is? Thanks in advance. Rosemary Forget the hitting the starter solenoid Remove the starter from car and install a new solenoid on it The contacts inside the solenoid are ...

...starter and another one on the firewall or inner fender.Follow the positive cable from the battery to the solenoid.Remove any covers that may be hiding it.Now,with the car in park or neutral and the ...

Question about Ford Thunderbird

1 Answer

Remove starter motor (11002). Position drain pan. Drain engine oil. Remove oil bypass filter (6714). Remove starter motor wire, ground strap and automatic transmission oil cooler lines. Remove oil pan

Question about Ford Thunderbird

1 Answer

remove the starter from the vehicle.To install: Position the starter motor to the engine, then secure with the retaining bolts. Tighten the mounting bolts to 12-15 ft. lbs. (16-20 Nm) on starters with

Not finding what you are looking for?
Cars & Trucks Logo

202 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...