...light and brake / stop light switchs on my 1969 Ford Mustang Mach 1 and yet, I still have no brake lights working. Although, all other lights ( turn signal, emergency, head- light are working) and I ...
Question about Ford Mustang
...brake switch feed, when brake switch is activated, to the rear brakes. Leave pigtail at both ends, splice in new wire, You could let new wire just lay on the ground, for testing, from brake switch to ...
...brake light switch on brake padle 1 of two things - brake light circuit fuse or the brake light switch. Switch is mounted just above your brake pedal under the dash there is a switch near the brake ...
Question about Ford Mustang
...brake light don't light. But this can be forced out of park. The brake lights fail all together while driving, because the wire on the brake switch behind brake pedal is shorting out. I hate someone ...
brake light switch on the base of the brake pedal.there should be a switch with 2 wires on it.one wire should have 12 volts at all times and the other should have 12 volts only when the brake pedal is
...brake lights that dont, any suggestions? check the wire harness that runs from inside the trunk on the drivers side follow it down to the tail light and make shure the wires are not damaged or ...
...brake light switch. Also check for a broken wire at the switch connector. The brake light switch is located on the brake pedal. two part prob:1. check air lines going to the shift silonoid nif that ...
Question about Ford Mustang
...brake light switch 1999 GT mustan Im not getting any power to the brake light switch? i have checked all fuses and fuse boxes they checked good. Any suggestions its still stuck in park and no brake ...
Question about Ford Mustang
...brake light dont work check #9 fuses change all bulbs replaced switch on brake pedal hazards lights works ,parking or running lights works,turning signal lights works,what other places i should check ...
...brake light switch. still no brake lights Did you change the bulbs? It might also be bad wiring. You can check the wiring by using voltmeter connected to the brake light and then have someone depress ...
516 questions posted
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
589 Questions
617 Questions