2004 Ford Explorer "removing truck bed" Questions

truck in the air as high as the stands will go. I just raised the rear of the vehicle by the Differential and set the stands under the rear axle as high as they would go. You don't really need the

truck bed from 2005 chevrolet avalanch need to change fuel pump disconnect all electrical wiring that is attached to the bed then disconnect the fuel filler tube. there is 4 bolts that hold the bed to

...One person fastest easiest way to remove bed or How to remove truck bed with an engine hoist One person job ...

...truck, pull the bed. That's what I have done many times. Remove 6 bolts that hold the bed on. Disconnect the wiring harness in the rear of bed where it splits off to each tail lamp assy. Remove 3 ...

and move the bed three steps to the rear of the truck.front of bed is now over the rear tire lower bed on tire and you are now over the fuel tank with full access to pump assembly without any problems

...bed of a truck crawl under the truck , 2 is at the frt of the bed ,then look inside of the chasis rails at the back 2 near the bumper and 2 between those bolts and the rear end located inside the ...

need 2001 dodge 1500 fuel pump replacement diagram 2001 dodge 1500 fuel pump make sure you get the right pump, you need to know your tank size. then take off your bed. you have i believe 6 bed bolts, ...

truck bed off the frame works best if you dont have a lift..take the fuel neck loose from bed and remove bolts holding bed to frame from the drivers side..loosen the bolts on passenger side..raise the

truck bed 2002 gmc sonoma There are 4 bed bolts under the bed on each side that need removed, also 1 bolt on each side for the ground for the tail lights, and 3 screws in gas door for the filler neck.

NEED HELP DO i NEED TO REMOVE PICK UP BED ON A 2001 F150 FOUR WHEEL DRIVE WHEN REPLACING THE FUEL PUMP IN TANK? you can remove the bed to get to the top of the tank or remove the tank I think it is ...