2004 Ford Explorer "high beam light" Questions

...high beam pass''. (I have to pull the high beam switch towards me for the high beams to work) if I set it so the high beams always stay on they don't stay on. I have to manually hold the high beam on ...

...indicator light comes on but neither high beams come on. replace the lights. Grease the lower ball joint's, if their sealed (original parts) use a needle attachment, but be careful their very

...high beams stay on when lights are shut off, or to low beam. Need to unhook battery power to reset lights, then everything is fine until the high beams are turned back on. Everything is fine if only ...

no highbeams low works fine. changed switch but still the same fuses are good. help 98 Explorer No High Beams Problem - Ford Explorer and Ranger ... https://www.explorerforum.com/forums/showthread.php

...high beam does. not bulb or multi switch or cramped wire any idea? Check the fuse box . Some vehicles have a fuse for the high beam and the low beam. Usually a 10 amp spade type fuse. Some vehicles ...

...high beam it works. high beam, drivers side works , don`t work on low beam Check tour bulbs first and replace if blown. If OK then check wiring backwards from light to dip switch. exciting. Women ...

...high beam,is it a fuse? My head lights will not work on low beam...ONLY High. Can it be a fuse? could be a fuse or the relay or simpler the elements in the lights blown, yes even both of them. No. ...

...high beam "FLASH" and they both worked. I'm confused! Does this sound like a short or something in the HIGH-LOW lever on the colomn? Light switch seems to be fine. ANY HELP? Sounds like it has ...

it could also be fuses, since the high beams and low beams have different fuses. It is even possible both bulbs burned out at about the same time. Use a test light to verify before replacing anything

...high beam. just bought vechile Check the bulbs first, then head light fuses if they apply. If they are ok, check the dimmer switch. If thats fine you will need to trace wires for a open circuit using ...