2004 Ford Explorer "car immobiliser reset code" Questions

...broke in my 2002 pontic montana,now he ignition turns but van will not start the immobiliser is probably the cause of this . first try and reset the immobiliser by using a code reader to reset the ...

...PATs system jump starting an engine will sometimes corrupt the program in the CPU . I would have the CPU reset using a code reader first so that the immobiliser was reset before I did anything

...immobiliser light flashing and car will not turn over Immobilisers may intercept one of three circuits; typically the low-voltage ignition circuit and the fuel pump circuit. Some may also intercept ...

...immobiliser won't reset and allow the vehicle to start engine immobiliser won't reset and allow the vehicle to start have you tried a code reader ? How do I reset it I put the key in the ...

immobilizer reset inadvertently uplugged the immobiliser and now no start try using a code reader to reset the CPU and immobiliser.

immobiliser is working and preventing the car from starting. Check that the battery in the fob key is good. Try and use a code scanner to reset the immobiliser in the CPU of the ECM. If there has been

...Have you tried turning the alarm back on so that it goes off again, lock and unlock the car with your fob now, then enter the code. This is because it might still be in the standard immobiliser

97 explorer immobilised Used a MAXSCAN GS500 on ford explorer 97 to identify error codes and now it looks like the whole engine has been immobilised. Tried resetting the fuel cut off switch, still ...

...car will not start at all it saying on the raidio vehicle id how do I get this id thanks Try using a scanner to reset the ECM for the engine start problem ( immobiliser program corrupted). it may ...

...> showthread Mar 2, 2016 · 23 posts · 10 authors Is there anyway to reset the car? I can still lock and unlock with the remote, but the ignition seems to have gone dead, and the immobiliser