2002 Ford Taurus "steering wheel lock" Questions

steering wheel on stops. Crank engine 30 seconds while cycling the steering wheel lock to lock. Check fluid level and add fluid if required. Air Purge with Vacuum External Source Procedure - 3.0L (2V)

...steering wheel turn to right or left? If so turn it to the way you left it as far as it will go then try to turn the key. Try this a few times to get it to key to turn. Also try rocking the car while ...

...steering wheel left while turning the key on the ignition. When you park with your wheels turn either way, There is pressure exerted on the wheel lock, like trying to turn a dead bolt lock while ...

steering wheel is locked in place and Parking gear is frozen. What to do. try to turn the wheel so that the steering wheel dose not have a load on it while truning the key also you may want to try and

...Steering wheel nut Removal Disconnect the negative battery cable and wait at least one minute for the air bag system to lose power. Make sure the front wheels are straight ahead and lock the steering ...

steering wheel around a little first. Sometimes the steering wheel can be in a bind and prevent the ignition lock from turning. Try and turn it to the left/right and/or push down/pull up on the wheel.

...steering wheel back and forth while you try to turn the key. If those two don't work than remove the key and tap the lock cylinder with the handle end of a large crew driver several times. Then ...

...wheel handle. Remove the upper and lower steering column shrouds. Remove the screws. Remove the upper and lower steering column shroud. Remove the lower instrument panel steering column cover. Remove ...

steering wheel is left full turn to one side, it puts pressure on the key. When you try to start, hold full pressure on the steering wheel to the left or right to relieve pressure on the key. Then the

...steering wheel. For details, please refer to the procedure located earlier in this section. Remove the two trim shroud halves after removing the three attaching screws. Disengage the electrical ...