2000 Ford F250 Super Duty Crew Cabs "turning vibration" Questions

there is a slight vibration on take off seems to be worse when turning and taking off. check your engine mounts if it vibrates through your dash board....if not it cud be ur stearing collom rubbers

...turning left is worse than right.It seems to be getting worse . You could have a bad wheel bearing or out of balance front tire. Without the trailer if you go on a curve the outside tire spins ...

...vibration when turning to the left and an intermitent heavy vibration (like riding on a rough road) that comes and goes? I have replaced my left and right wheel bearings as well. What could this be? ...

Vibration Rear of 2005 F250 FX4 Diesel Truck I have a vibration that seems to be coming from rear of truck. I have had 2 sets of tires and 2 sets of shocks, have pulled the drive shaft, both end to ...

four wheel drive not engaging I have a f-250 diesel, the four wheel drive will not ingage but the light is onsaying it is. When the four wheel drive is not engaged and the light is off ther is an ...

when i turn the lights on and pull the switch for the fog lights nothing happens whats wrong? Those bulbs are subject to a lot of vibration and filaments may be fractured, check for power with a test ...

I have a 85 ford f250 with a 460 engine and a C6 transmission. After driving it for 30 miles or so I get a vibration coming form the rear area of the truck when I stop and go, also when I turn left or

50 -65 miles per hour.Truck drives great and no other problems with the transmission.I have started turning off the overdrive on slight hills and grades till the terrain levels...any advise on what is

85 f250 2wd, 6.9D, 4spd, Dana 60 rear 1985 F-250 Noise coming from rear. Sounds like taking two metal spoons and smacking together as fast as you can, and something new came up today, and only in 3rd ...

I just put on a new rebuilt carburator on my 460 v8 1987 xlt 250 ford truck 4 WH. drive. its a motorcraft stock holley. I cant seem to find a way to ajust it. Wont run smooth or idle? It was set up ...