1998 Ford Taurus "cut hole fuel pump" Questions

...cut a hole to access fuel pump....is that need to cut a hole in 93 Trans Am to access fuel pump....is that a possibility? I know this is not the "right" way, but can it be done? if so how? it would ...

fuel pump Where do I cut the panel hole acess on a 91' park to remove the fuel pump? You don't cut an access hole. You have to remove the fuel tank.

...cut a hole in the floor for fuel pump access ? Don't cut anything. Drop the tank. dont cut the trunk un bolt the straps and drop tank safer ,easier,and less chance of damaging tank/hoses and ...

...cut hole for fuel pump on my 2000 taurus You do not cut a hole, you remove the tank from the vehicle to access the pump. Never cut holes with any device or means near a gas tank . Any copies are VERY ...

cut a hole into the bed over the tank to get to the pump, if you do decide to cut a hole, only cut 3 sides and bend it over so you can bend it back in place after changing the bad fuel pump. Good luck

...Cutting a hole to access it? This is a short cut that is careless and damaging AND dangerous, to say the least. Spend the little extra time required and do it the RIGHT way, you'll be glad you

...cut the hole with. any power tools will make sparks (what you don't want anywhere near a fuel supply) You cannot use a torch either. A hole saw is the right way to cut the hole but it will be ...

cut an access hole in floor above fuel tank to remove fuel pump on a 2001 Pontiac Grand Am instead of dropping fuel tank and if so, where would I cut out access hole location? You would have to figure

...Cut a hole out of the bed over the fuel pump to access? What are the dangers involved with accidental ignition of gas fumes or the gas itself from static shock? Is the fuel pump located in the front ...

...cut a hole in the floor above the gas tank and remove the fuel pump that way. Probably a dumb question, but I need the ask. Thanks some have a trap door in floor board to get to fuel pump, check it ...