...ECT sensor and the sensor for How to identify the differences between ECT (engine coolant temperature) sensor and the sensor for the temperature panel and their location to one another (which one is ...
...ect sensor located on my 1999 Ford Explorer 4.0 v6 Most ECT sensors (arrow) can be found on the intake manifold, near the water outlet housing... Hope helps (remember to arte this). This is the worst ...
...Engine Coolant Temp Sensor, Poor connection/Harness/Wires, faulty PCM Connection. I think you hit the nail on the head , the ECT Sensor ( which is different than the temp sensor for the dash
...to positiveand p1132 is heated oxygen sensor not switching, fuel trim, rich mixture.......intake/fuel system injectors MAF sensor, ECT sensor. hope this helps and if you need any more info just ...
ECT) sensor camshaft position (CMP) sensor crankshaft position (CKP) sensor mass air flow (MAF) sensor heated oxygen sensor (HO2S) knock sensor (KS)The PCM carries out the following functions: accepts
ECT) sensor (4.0L SOHC) Cylinder Head Temperature (CHT) sensor (4.6L [3V]) Mass Air Flow (MAF) sensor Vehicle Speed Sensor (VSS)------------------------------------------------------------------------
...ECT sensor minimum is 0.2 volts or 121°C (250°F). Do you have access to a scan tool that can read PIDS? If so access the PID and see what it is reading,then disconnect the sensor and see if the ...
where is the ect sensor located on engine by the water outlet or on it.
Question about Ford Explorer
sensor the down side is explorers only get about 400-450km per tank here on the west coast with all the hills and if you have the 4.0 ltr v6 it is a gas pig of a V6 so as a ford guy start with plugs n
sensor must be too. There were three different engines offered for that vehicle and there is a separate temp sending unit for the gauge than there is for the computer(PCM). The V6 4.0 SOHC ECT for the
4,510 questions posted
Usually answered in minutes!
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
1,369 Questions
