1998 Ford Explorer "changing dash lights" Questions

dash lights wont work in my 2005 for explorer after changed raido whats wrong The first thing I would check is to see if any of the wires you changed grounded out and caused a fuse to blow. Also it is

and replaced the brake light bulbs if necessary then, if your dash lights are also out you should change the headlight switch, if you have dash lights the check the brake light switch (under the dash)

...but as soon as I shut my door the dash lights turn off???? I can't figure it out I've changed the switch there's no burnt wires that I can see HELP -Sounds like it Need re done ground. Good Luck. ...

...dash lights Dash lights are replaced from the rear of the cluster or control thats out, take note that some of these newwer cars and trucks have clusters that the bulbs are part of the electronic ...

i step on break pedal but i have full breaking power I changed the whole master abs cylinder but the dash board light still comes on ABS lights are usually triggered by a sensor, not a master cylinder

lights ,dash lights Changed engine and now have no lights on my 1995 pontiac grand-am check all fuses there will be some wnder the hood as well as the kick panel get a light tester touch to every fuse

how do i reset my computer? engine check light is on after the transmission was change the 4 wheel is engage and won't disengage unless i unplug the harness from the transfer case. there is an orange ...

...dash is on along with interior lights I can't seem to locate the door switch for the interior lights the door switches for that year explorer are actually found inside the door panels, built into the ...

lights on the dash. Flashing 4WH and 4WL lights on the dash with switch position on Auto. What does it mean and what is needed to fix the problem? Car dirves fine. This is purely a guess, but it seems

my front driver light is broke have no dash lights or break lights Change your light that is broke and check the fuses to see if they are good.