1996 Dodge Ram "change air blend actuator" Questions

air from panel to defrost. Anyone have a link to how to fix? actuator blend door clip or rod maybe broke find ur actuator/blend door and see if its intact,b 4 that c if it will change back to panel if

...change the blower air direction. Any assistance is appreciated, particularly if I don't have to replace the controls, but if I gotta, so be it. Check for vacuum at the control switch, and replace the ...

air only blows on defrost (windshield) My 99 dodge ram diesel 3500 heater only blows on defrost. I cannot change it to floor or panel or mix. I have read elsewhere that it could be the 'blend' door ...

...air blend doors first, it sound like they are not working or your control in the dash is not working send a signal to them. they work by changing the air from hot to cold or in between. Avalanche, ...

air blend actuator 2000 ford explorer is not working? Heat is coming out and will not change. How do I fix? First, insure you do not have a vacuum leak or bad vacuum check valve. If this is all good, ...

...door. Right 98 sts driver side not getting as cold as passenger side air when i turn the control for driver the temp does not change is it the blend door actuator or some thing ...

air door.Although there are several things that can cause the actuator to not work, it is usually caused by a failure in the actuator itself.If you can actually see the actuator moving when you change

air is not working properly sound like a vacuum leak. you can check this by spraying wd40 very carefilly on the vacuum lines under the hood. the idle will change when a leak is detected. could also be

air blend door actuator on start up blend door changes back and forth from setting to setting by its self until car is warmed up have replaced blower control modal This could be a computer problem or ...

...air will come through teh other vents not slected ? i have also tried to remove the actuator and reset it with little change ? if it is the blend door not shutting all the way how do i go about ...