1993 Pontiac Bonneville "replace rear maine seal" Questions

replacing rear seal on a 389 engine no easy way. you have to separate the transmission from the engine, remove the flywheel/flex plate to access the rear main seal.

...replace the nose or do I need a whole new unit. Sounds like you have a bearing failure either in the extension housing or at the rear of the impellers. you can remove the extension housing by first ...

replace a rear main seal in a 2001 chevy 2500 do i have to remove oil pan and loosen crank bolts to replace the rear main seal? is it easyer to pull the eng. and replace seal? how long is the standard

...the rear main seal on the engine, it is best if you replace the front transmission seal at the same time if possible. Installation varies on different vehicles but the principles are the

...replace the rear main seal. There is a possibility of a two part seal. If you have a two part seal drop the oil pan and pull the rear main engine cap off and then replace the seal. You may need ...

...replace rear main seal toyota camry How many mechanic hours (estimated) would it take for a good shop to replace both front and rear main seals? Only 91k miles. I want to the car to last. Four ...

...replace rear main oil seal on vx commodore 5.7 auto To replace the rear main oil seal I would recommend changing the whole rear main plate with gasket seal already done. 1.disconnect battery 2.raise ...

...rear main seal or crankshaft oil leak? I just replaced the ****** however now there is an oil leak where it connects to the engine. Guy claims he replaced the leaky rear main seal free of charge. ...

replace rear main seal in 99 ford explorer? THE REAR MAIN IS WHAT IS CALLED A FULL CIRCLE SEAL, SO YES THE TRANS AND FLYWHEEL MUST BE REMOVED, U WILL ALSO NEED THE SPECIAL FORD SEAL INSTALLER, WITHOUT

...replace the rear main seal u have to pull the transmission out to access it, u will need a special seal installer tool to install the new rear main "full circle seal", it u don't use the special ford ...