2006 Ford Explorer "replacing spark plugs" Questions

Ad

Question about Ford Explorer

1 Answer

...Spark plug Replacing for? http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html ----------- How to identify number one spark plug on the distributor cap? ...

Ad

...spark plugs in a 2003 Ford Explorer Limited (4.6L V8) and should I replace the coils at the same time? Hello. Since you did not indicate the total miles on the vehicle I can not speak to the coils. ...

Ad

...spark plugs, or did any of the spark plug wires get damage while removing them, or did a spark plug wire get crossed,the engine light is most likely a cylinder misfire, I would check or replace spark ...

...spark plugs. I did that one at time to ensure I didn't get the wires crossed and the performance is worse. Hope this helps. The ignition coil: changes low-voltage pulses from the PCM to high-voltage ...

...spark plugs 5 and 6. It could be bad fuel, bad plug wire, or weak coil. Check the fuel injectors as well. Other possible causes could be an egr valve stuck open, vacuum leaks, low fuel pressure. That ...

...spark plugs - procedure? replace spark plugs - 2002 Ford Explorer 4.6L - procedure? Best access to plugs, etc. pretty simple just screw them out and replace them you may need an extention with a ...

Question about Ford Explorer

1 Answer

replace spark plugs wires Spark plug wires not lable,don't know which go where Easy. change 1 spark plug at a time with out having to remove all at the same time.

Question about Ford Explorer

1 Answer

spark plugs put new coil pack still no spark Same problem with a 1994 explorer. When I 1st baught the car aout once per month the car would turn over fine but not start, Turning the key from off to on

Question about Ford Explorer

1 Answer

...spark plugs in 2006 explorer xls Click this link below and go through the procedure:--- http://technoanswers.blogspot.com/2011/05/how-to-replace-spark-plugs-in-2006.html --------------- This should ...

Question about Ford Explorer

1 Answer

...EACH INDIVIDUAL COIL.DISCONNECT COIL ELECTRICAL CONNECTOR.THEN REMOVE COIL RETAINING BOLT.THEN REMOVE OFF SPARK PLUG.THEN REPLACE SPARK PLUG.YOU HAVE 8 COILS TO REMOVE BEFORE REPLACING SPARK

Not finding what you are looking for?
2006 Ford Explorer Logo

1,260 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...