1992 Ford Ranger "dpfe sensor 2" Questions

...DPFE sensor. In effect, since the failure rate is so high, if you get this code, replace the sensor and retest. When the DPFE Sensor starts failing, it gives the PCM bad information. The DPFE Sensor ...

I have a 1997 ford ranger, I am trying to locate the DPFE sensor 4.0 L moter, 2 wD It is in the exhaust pipes between manifolds and catalytic converter

to right. #1 circuit 351 refrence voltage. #2circuit 359 signal return. #3 circuit 352 signal for dif. pressure sensor (DPFE) input. That is with the opening of the plug facing you. #1 #2 #3 like that

...sensor located on a 1999 ford ranger 2.5l I believe it's on the right hand side near tranny dipstick. .simple thing to do is follow the egr steel exhaust tube from the back of the motor, the D.P.F.E ...

DPFE pressure sensor I have a 1998 Ford Ranger truck will it cause any problem if not fixed soon? What engine? It won't cause any running problem but gas milage will be effected just because the light

...be DPFE? Cam Pos Sensor? dirty intake? battery cable? rear brakes or ABS sensor? Thanks in advance :o) try disconnecting the vacuum line from the EGR valve and drive it to see if it makes a ...

DPFE Sensor with codes PO401 And PO402 Where Is the DPFE sensor located on a 2001 Mercury Sable with a V-6 over head valve engine. The DPFE is located near the EGR valve, it has 2 very thick silicone ...

...DPFE) sensor voltage through the scan tool or backprobe the Brown/Light Green (BN/LG) wire of the Exhaust Gas Recirculation System Module (ESM). Voltage should indicate a reading of 0.5-1.2 volts. 2. ...

...DPFE sensor signal circuit is shorted to ground DPFE sensor VREF circuit is open between sensor and PCM DPFE sensor downstream hose off or plugged DPFE sensor hoses both off, loose or damaged DPFE ...

...dpfe sensor. Were are they located? Dpfe sensor is usually on driver side intake manifold or on a bracket attached to it. It has 2 vacuum ports & a electrical plug. Look for cracked or broken ...