1992 Ford Ranger "2 front axle" Questions

...end goes bad will the 4wd still work well yes and no if rear end goes bad and you shift it in to 4wd front end will still engage so techinally your still in 2 wheel drive just using front axle ...

...2 wheel drive need to replace oil seal Raise the vehicle and properly support it. Remove the wheel and drum. Remove the rear diff cover, have a drain pan underneath to catch the gear oil. Place the ...

...front axle shaft 94 ford ranger remove rotor, and hub. anything else? you shouldn't have to remove anything else, unless it is in your way, one end of the shaft should just come out of the spindle, ...

...2 wd. It sounds like you are driving in 4wd drive on dry pavement. The front drive axles do not work like the rear differential. When you turn, the outside front wheel must travel farther than the ...

...2 wheel drive automatic. I am hearing noise from the rear end when accelerating around curves. Kind roaring or growling noise with a little vibration from 40 to 80 miles per hour. Firstone wants to ...

...front axle 1. If you are speaking of the large yoke nut there is no "torque spec" per say, instead it is a rotational preload- From Ford manual: Use the special tool to hold the pinion flange while ...

...2 wheel drive.Just the other day i had a wreck. A guy hit me on my driver side bumper and the driver side wheel and the ABS light is on and one of the front wheels is locking up and the brake light, ...

Front Wheel Bearings - REMOVAL & INSTALLATION (see Figure 1 ) Fig. 1: Inspect the bearings for abnormal wear and/or damage With Manual Locking Hubs (see Figures 2 through 17) Raise the vehicle and

front brake rotor on 1992 Ford Ranger 4wd with auto lock in I have a cracked rotor and am having trouble removing the old rotor, thought I had removed everything holding it in place but still will not