...on a stock viper engine and damaged the pistons. I rebuilt the engine and replaced the pistons with forged pistons with a little lower compression piston stock 9.7 - 1 new 9.4 - 1. Can't figure out ...
...Pass side 2-4-6-8 front to rear. Driver side 1-3-5-7 front to rear. The firing order is probably forged into the intake manifold. Number one tower on the distributor cap is the one facing the ...
Question about Dodge Ram SRT-10
...side 2-4-6-8 front to rear. Driver side 1-3-5-7 front to rear. The firing order is probably forged into the intake manifold. Number one tower on the distributor cap is the one facing the ...
...is stranded out of town....please help... both the firing order and the cylinder location are forged right on the intake manifold but click here http://www.fixya.com/uploads/Images/0584D93.gif
...vibration isolated Front Cover:Diecast 380 aluminium; internal multilayer damping panels Crankshaft:Forged steel Connecting Rods:Sinterforged steel Pistons:Aluminium, polymer-coated skirts, ...
...Forged out line. Line the two dots on the c-shaft up with this line. When done with this you may fit on the belt and make sure that the belt is fitted tightly on the exhaust side meaning pulled to ...
Question about Dodge Ram SRT-10
...rubberband cam belts, real chain, drive. 2 valves per cyl. making head rebuilds fast and cheaper. forged pistons, not cheap cast. MOPAR is not POS. ask engineer Brian Crothers I run the 3.8L in my ...
27 questions posted
Usually answered in minutes!
2 Questions
6 Questions