1995 Pontiac Bonneville "belts" Questions

i need a diagram for serpentine belt on v6 3800 there should be a white decal on the upper rad support that has the belt routing.some of these are on a white decal on a belt cover at the front of the ...

...to remove the Supercharger belt in order to replace the main drive belt?? Yes, replace all of the belts while you are there. if there is 2 belts and the one you need to replace is closer to the ...

How do I change a serpetine belt on a 1999 Pontiac Bonneville ? be sure to view the belt diagrahm...locate the tensioner pulley and insert the drive end of your 3/8 drive ratchet into the square slot ...

IM PUTING ON MY SERPENTINE BELT & when i start the car the belt comes off why whats wrong 1.Either you do not have the belt lined up correctly with the grooves on the pulleys, 2.Or the belt has ...

i have a 95 bonneville if i need my water pump replace do i have to replacing my timing belts also it will have a chain instead. i would change it if you have 80,000 miles or more on this engine No ...

...pulleys from below the engine well or through the wheel well to get the belt out. 6 Stretch both belts out to full length to make sure the new belt and old belt are nearly identical in length. The ...

I replaced the serpentine belt in my bonneville and it seems to have 5-6 inches extra.....what happened, did according to diagram they may have given you the wrong belt. there is one for air ...

replacing the drive belt if belt has not broke make a drawing of how it go on and then use a breaker bar and socket on the idler pulley to raise off belt and remove belt while holding up on pulley. ...

free belt routing diagrams 3.8 Hi there,here's a link to your belts,join the AutoZone site,it's free then you can use their repair guides free. Repair Guides Engine Mechanical Components Accessory ...

I need a serpentine belt diagram for a 1997 pontiac bonneville se 3.8L - no turbo there is one on the hood or on the frame on the car. Fig. Fig. 8: You can use a box-end wrench on the pulley nut to ...