2006 Pontiac G5 "stop gear shift button sticking" Questions

...same time but the gear stick doesn't catch on the other gears. Do the brake lights work ? The shift release works through the brake switch and if it stops working it will not release out of park

...or bushes of shift stick or button release stopped out of any gear stuck mechanical park locking pall inside the transmission transfer case or drive train issue broken engine or gearbox ...

...gear and at lower rpm shift points. In "S", the transmission will shift at higher rpm levels and will go no higher than 3rd gear and light S3 on the dash. Once the vehicle is in 3rd gear (S3) you can ...

...stop the shift from 1st to 2nd is at 18mph and softer once or twice the light has started when I was already in third I am using a ScanGauge to help diagnose problem it will gear ratio ...

...button that you stick in to shift gears has popped out. I need to know where I can get one. Junk yard as GM has discontinued the parts that are unique to the quad four engined cars as to get them off ...

...gear, it stops all together, pressing gas pedal doesnt work. You have to pull over and then it will go again....help Low on transmission fluid. The tranny fluid can only be checked by Chrysler, there ...

gear and it takes off in 3rd or 4th and it won`t shift, i stop and disconect the battery and hook it back up and it is fine and i have all the gears, it shifts fine and i can`t make do anything wrong,

...gear (all gears) I have to pull over I can hear metal grinding noise really bad when I shift thru n to p and than it stops. Push the auto button and truck moves fine I than can put back in 2w. did ...

...shift lever stuck in low gear and transmission not shifting. It sticks in park unless you release it by pressing a button below the shifter, then it is stuck only in low gear. It runs as if it is in ...

...shift stops are P-R-N-D-3 While in D (Drive) mode I used to be able to hit the overdrive button which put the gear in 4. Likewise while driving in 3 (3rd gear) I used to be able to hit the button and ...