2004 Ford F250 "valve" Questions

where is the pcv valve on a 1988 ford f250 PCV valve is in the valve cover with a hose connected to it. Pull the valve straight out of the cover and then remove the hose to replace. Any questions, ...

My truck has dual tanks. Is the switching valve My truck has dual tanks. It runs good on one tank, not so good on the other. I have narrowed it down to the switching valve. Is the switching valve ...

...vacum signal it can cause the clicking as it goes between 2WD and 4WD. It gets it's vacum from two valves mounted on the firewall just behind the battery(to left). The white line feeds manifold

Fuel Gas Tank Reservoir Selector Valve leaking when using front tank When on rear tank Gas Tank Reservoir Selector Valve don't leak, but leaks when on front tank The seal in the selector valve is bad ...

...real bad shut off awhile and runs good for a few minutes then starts sputtering again check egr valve make sure it is not being opened at Idle when warm generally you can see the rod for the

computer said i have a bad air idle control valve. I replaced it and the ERG valve. Now it races. Help??? ford f250 1992 clean up the old valve with carb cleaner-make sure it slides open and shut,put ...

...460, the fuel filter was original and clogged so i replaced it but when i started the truck the pcv valve and gromet came out of the valve cover, i cant find a gromet that will fit in the valve cover ...

Where are the glow plugs located on a 2005 F250 Powerstroke 6.0 GLOW PLUGS ARE LOCATED UNDER THE VALVE COVERS. yes the glow plugs are under the valve covers close to the injectors and valves

pcv valve on 1989 ford f250 I need to know which motor you have to help more? most are in the corner of one of the valve covers with a hose attached to it, after knowing which motor can direct you ...

...cool air, what else should i try? not sure what year/model you have, but some cars have a control valve in the heater hose and is supposed to open when the temp is switched to hot. Sometimes the ...