2003 Ford Explorer "replace emergency brake" Questions

Ad

Question about Ford Explorer

1 Answer

...Emergency brakes should have been fixed in Sept. with the rest. Most good Mechanics will tell you once they see their condition. In the Rustbelt, you can have a big problem in fixing the E brakes and ...

Ad

...emergency brake often it may be worn and should be replaced with a good used or new assembly. Other than being hard to twist your body into they are relatively easy to replace. Most people don't use ...

Ad

...emergency brake be unseized on a 1997 Ford Explorer or do you have to replace the whole cable? You do not need to remove it. Trace the cable back to the rear rotor(s). Grab a pair of pliers and some ...

emergency brake. first guess i would say brakes are grinding. if that isnt it i may say that the a bolt may have fell out of the brake caliper and the caliper is rubbing against inside of wheel. could

Question about Ford Explorer

1 Answer

...replace emergency brake shoes on my 2002 Ford Explorer 4.0L 4x4. This is my first time trying to work on something with rear disc brakes. I use and I'd recommend you register for free at ...

...and the emergency brake on, AND FOOT ON THE BRAKE.BE CARFUL NOT TO RUN OVER YOUR HELPER!!!! If it starts to work,replace the 4x4 motor. The inside of the motor gets corrodid from water and

...replace with new or have them machined), it is best to loosen the emergency brake shoes. To do this, behind the rotors, in the back there is a rubber plug, remove that and you can use a screw driver ...

Question about Ford Explorer

1 Answer

...emergency brake. Bled the brakes and thought it was fixed, pedal goes completely to floor and have to pull out manually. What you might try is a different abs unit as there is valving inside this ...

...emergency brake so I can remove/replace the rotor? lot of time there a hole in the rotor that for the ajustment unscrew the ajustment if you dont have a hole hammer big one there a ridge inside no ...

...emergency light switch. Sometimes it may not switch completely, turn it on and off a few time and then recheck it. Replace your stop/tail light globes. The brake one always goes 1st. I agree with ...

Not finding what you are looking for?
2003 Ford Explorer Logo

2,160 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...