1996 Dodge Avenger "connecting wires fuse" Questions

I want to hook up an amp and speakers to my 2008 I want to hook up an amp and subwoofers to my 2008 dodge avenger and want to keep my stock radio so I purchased a "line out converter" for a RCA hook ...

...fuse block to get this window up. The motor has two connections. One for up and one for down. If it goes up check the wiring between the wires inside the door to the inner kick panel area at the ...

1996 dodge avenger I just bought my 2nd avenger es, and found that when i put my cd player in the speakers didn't work. we checked the fuses and there all fine we checked the connections to the amp ...

I replaced the distributor, coil ignition module cam position sensor and still no spark in a 99 dodge avenger what could be the problem Often, modules and sensors are not the problem, rather the ...

I have 97 dodge avenger that the transmission has a mind of its own. I works some time and sometimes it wont do anything. You can take it around the block and it will work some and then it will rev up

ground wire location I have a 2011 dodge avenger my parking lights in the back don't work and the fuses are good. We're is the ground located so I can take a look.when I lock my car with the remote I ...

wires are connected to that fuse and check them for any chaffing, cuts, unnesassary twists, or corrosion. If you have a ohm-meter, isolate the system ( by disconnecting the fuse, and other connections

when I connect the battery the blinkers come on constantly glowing, nothing else works, check the fuses, the alternator fuse is blown, replace that, connect the battery fuse blows again. 2007 solara. ...

...connecting from the battery to the fuse box had melted the fuse box and was bad. we had the wire cut and re connected to nthe fuse box which solved the problem until today. now the fuse box is melted ...

...fuse block. A good location would be near the battery or under the seat for easy access. Locate the positive (+) and negative (-) wires coming from the battery. The positive wire should be red, and ...