1989 Mazda MPV "drive working" Questions

mazda mpv automatic transmission does not work in drive car works fine in low and second but when it shifts to drive it slips and the engine revs. Is it toast or an adjustment? Trans fluid is full. it

My over drive light is blinking. what can i do to fix the problem. How can i fix over drive blinking light? FIRST CHECK TRANSMISSION FUSE.BUT IT SOUND LIKE TRANSMISSION HAS FAULTY TORQUE CONVERTER ...

auto transmission will not engage in DRIVE gear when starting. when first starting engine and engaging in Drive, the vehicle often slips back into neutral and often requires 2nd or 1st gear to drive ...

the engine temperarture will go up if I am driving with ac on the engine temperarture will go up if I am driving local with the ac on but if I am on the hy it doesn'tget hot check you radiator, clean ...

drive it won't go. If it does get going it doesn't shift gears When it does start going if the RPMs are raising but will not shift then most likely the transmission is slipping and needs to be rebuilt

...does not work/show on dash as active any ideas are you sure the power button does not work just drive the car on the highway and put the power on then rev the car if the car revs up (usually at 3

Where is the starter located in a 1996 Mazda MPV? 4W drive? you can't see it, you need to remove the alternator, Power steering, I take off the power steering bracket, disconnect the tranny cooling ...

Emergency brake light came on Driving down the road the emergency brake light came on. The brake handle was in the down position. Had been driving for several miles when came on. There is an electical

mazda mpv overheating when driving I have a 2000 mpv lx mazda and it's been overheating when driving in normal condition. I have changed the thermostat and flush the radiator out but still have the ...

The front fan doesn't work when I turn the dial. The ac button doesn't light up or seem to work. but when the dial is turn to heat and driving hot air will flow through vents the fan was working fine ...