2004 GMC Sierra 2500 "easy repair blend door" Questions

Ad

Question about GMC Sierra 2500

1 Answer

check out www.heatertreater.net for help. Easy repair if its a blend door peoblem. Use the hot steak knife , cuts easy when heated, to cut open the plenum to get at the broken doors inside. Good luck

Ad

...repair A/C systems on older cars MAY have a 'secret way' to accomplish the job without having to remove the evaporator case. However, some cars are not so easy. You MAY have to take out the entire ...

Ad

Question about GMC Sierra 2500

1 Answer

...repair I suggest you seek out your favorite local shop. removing the dash is not easy, there are alot of screws, some in very difficult places to reach. Testing the motor is easy. I hope this helps, ...

...easy repair due to the number of wire connections and screws and fastners to be undone and redone. If you are not comfortable with this repair, I recommend a good local shop, if you are comfortable, ...

...easy to replace.Since your Navigator is most likely equipped with automatic climate control, you may also have a problem with the interior temperature sensor.  This could make it do what you are ...

easy to troubleshoot and repair these problems as there is limited space to work under the dash. The problem can be vacuum related as most blend doors operate on what is called vacuum motors. There is

...easy ones to get at and under hood heat causes deterioration. The defrost is the default mode for the airflow. You will most likely have a problem with one of the blend door motors/actuators not ...

...repair easy and what parts are needed? Sounds like the teeth are striped and depends on which one is bad to how hard it is to get to. But the door has to be checked if the door is broke or binding it ...

Question about GMC Sierra 2500

1 Answer

2003 chrysler alway blower hot air can't from hot to cool Need to check the blend door actuator...not easy job to check it out as well as it is costly repair.

...easy to change, it requires removing the entire dash. At the center bottom of your dash you will find a plastic cover, remove it and look in the center you will find a stepping motor, probably white ...

Not finding what you are looking for?
Cars & Trucks Logo

207 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...