2002 GMC Sierra 1500 "fuel remove sending unit" Questions

...replace the fuel sending unit You will need to drop the fuel tank because the fuel pump is inside the tank. you have to remove the fuel tank to get access to fuel pump and sending unit hope it ...

fuel sending unit by itself or should I change the entire fuel module? If I change just the sending unit, will this short out the fuel pump? I think you'll find sender & pump are all one assy. What is

...remove the tank. To do this job right relace teh entire fuel pum/sending unit and the electrical has to it some times the new unit comes with the wire harness also spen the extra 15$ and replace the ...

...fuel tank. Remove or disconnect the following: Fuel tank WARNING Do not handle the fuel sender assembly by the fuel pipes. The amount of leverage generated by handling the fuel pipes could damage the ...

...fuel lines flexible enough to remove the tank straps and let the tank down? Can you provide the proper steps for removal of tank for access to fuel pump? Thanks Scott I don't think there is enought ...

...remove the fuel. then drop the fuel tank by removing the 2 retaining bolts one at a time. that way,the tank will be empty and light. use a jack to support the tank from underside 1st. remove the ...

fuel pump is usually on the same stem that you will remove from the tank with gauge variable resistor unit. Due to the trouble of removing the tank I would recommend replacing the fuel pump inside the

...fuel sending unit assembly to fix gauge...It wasn't cheap...Should have been a recall but it wasnt...However I don't have enough info for the heat/cool problem...Is the blower motor running all the ...

...fuel pump, then remove the attaching screws and the pump Fig. Fig. 2: Exploded view of the fuel pump assembly for the 323, Protege, 520-22 626, MX-6 and 522-24 MX-3 If not already done, detach the ...

fuel pump/sending unit. 4. Remove the attaching screws from the fuel pump/sending unit access cover and remove the cover. 5. Disconnect the fuel supply and return hoses from the fuel pump/sending unit