...wheel drive, the front drive shaft turns but the front wheels do not move. What could be the problem? You probably have blown drive hubs. Do you have to engage the hubs at the wheels? If not and they ...
...is on but I'm stuck because the real wheel spins out and the front wheels don't pull. What are the possible problems? 2001 Chevy Silverado 4 wheel drive solonoid is not kicking in your front
...front axel. a easy test is to put the truck in 4 wheel high. holdthe brak and givei little gas ad havesomeoneelse stand to the side ofthe front of the truck and see if the front axel spins. ifso th ...
...wheel drive wont engage to front end drive shaft is turning and actuator is moving acuator at transfer case or at frt diff if acuator is moving then axles to wheels should be turning and you may have ...
...wheel high on a back road. The truck is a 1991 Chevy Silverado CK 2500. The front axle drive light on the floor shifter does not light up when shifting into 4 high or low now. Does the vehicle still ...
FOUR WHEEL DRIVE ENGAGING FOUR WHEEL DRIVE. Check your actuator on front axle the vacuum hose comes off.
...wheel drive trucks only. From around 1974 through 1979, v8, auto tranny 4x4 used the np203 full time case, 1975-79 manual trans 4x4's used the 205.......for 1980, all 4x4's used the 205 ...
...OFF. IF IT'S REAR WHEEL DRIVE, YOU SHOULDN'T NEED TO REMOVE BOLTS ON FRONT! IT SHOULD SLIDE OUT OF THE TAIL SHAFT OF THE TRANNY! SOME ARE A LITTLE HARD TO REMOVE, BCUS OF THE LONG YOKE SHAFT ON
...front wheel bearings? it is a 4 wheel drive. thank you for any help it is a full days job plus for semi mechanic, best info on how to do would be getting a chilton's repair manual at most auto parts ...
my 1997 chevy 2500 four wheel drive just stopped working the lights that tell me that its ingaged isnt coming on Sounds like the actuator on the front axle is bad.
128 questions posted
Usually answered in minutes!
47 Questions
30 Questions
28 Questions
10 Questions
11 Questions