1997 Volkswagen Golf "jeep transmission linkage 4 wheel" Questions

...jeep grand cherokee wont go in reverse all other geare are fine i have you inspected the linkage?Is this an automatic transmission?Is this 4-wheel drive?Have you checked the transmission fluid?Best ...

jeep 1976 cherokee after replaced transmission and 4 wheel drive unit thats a problem with the shifter for the 4wd unit or the transfer case itself you have get under the car and see if the linkage is

Jeep grand Cherokee stuck in 4 wheel drive. Hello nicky...Check the transfer case linkage and see if it is working freely....the linkage could be hung between 2wd and 4wd. You may be able to keep ...

if where it hooks to the transmission appears to be trying to move back and forth as they are trying to move it, they cable is probably fine, check to see that the linkage is clear of any obstructions

...jeep wrangler with 48000 miles will not go into reverse``does the entire transmission have to be replaced? If it does not go into reverse it could be a linkage problem. But it its going into park and ...

...transmission. WELL HAVE YOU CHECK THE SHIFTER CABLE MAKE SURE ITS MOVING THE LINKAGE ON TRANMISSION IF IT IS MOVING LINKAGE IN TRANMISSION AND YOU CAN PUSH THE TRUCK AROUND IN GEAR SOMTHIG BROKE IN ...

...linkage. also make sure that the transfer case fluid has been changed and is in good condition. if you haven't changed it there is a drain plug and a fill plug on the back of the transfer case. most ...

...transmission..there is a parking cog..and its not in your transfer case..and either its wore out..or you vehicle needs some shift linkage adjustment..or the linkage has gotten bent from 4 ...

...jeep grand cherokee wont shift out of first. neutral, reverse, park are ok. There is no slipping. I tried the on off sequence to get a code and all it says is done. This just started with no other ...

...jeep to fix up. the motors a 360. well the transmission has the 4whl drive arm that runs into the vehicle near the seat for high and low . that is not hooked up and im missing some vacuum lines. any ...