1995 Mazda Protege "replace power steering pump" Questions

...you have to remove the outside belt? If so how is that belt removed? JUST LOOSEN THE BOLTS OF THE POWER STEERING PUMP TAKE OUT THE BELT FOR THE PUMP THEN REPLACE THE ALTERNATOR BELT AND STEERING

Power steering problem There is a whining noise when I turn my steering wheel and it is harder than normal to turn it. There is plenty of power steering fluid and when the engine is idiling you can ...

need to replace alternator belt, but I can't seem to be able to loosen the power steering pump there is a mounting bolt under the power steering.pump.

...replace a serpentine belt on a mazda 626 A 626 has two belts. One drives the power steering and water pump (rear belt in 6 cyl) and other front belt drives the a/c and alternator. On the 4 cyl, the ...

...replace I broke the plastic connector to the power steering pump last month. Like Jrnbudd said, I used JB Weld to repair. You must clean part thoroughly with acetone or laquer thinner, then sand- ...

...Power Steering Pump and the Air Conditioner Compressor (if equipped) and the other belt goes around the Crankshaft, The Alternator and the Water Pump. You can have your local parts supplier verify ...

...to see the diagram to identify the parts for replacing a power steering pump and its related coolant lines for 1993 mazda protege with a automatic transmission 4cyl sohc 16 valve mazda rx -7 ...

When replacing the transmission fluid, where is the reservoir for the fluid? The transmission itself is the reservoir, there is no separate tank like a power steering pump has.

...power steering pump to slide inward to be able to install the new belt. But it wont budge, Can you tell me what I might be doing wrong? I would appreciate any help / advise with this mater. Thank you ...

replace the 2 serpentine belts on the 1995 mazda protige First loose the Power steering Pump and push it down,then remove the belt(This is the first belt you have to remove,. then loose the alternator