1985 Mazda GLC "6 ignition switch problems" Questions

for 6 years since radio was yanked out. I believe the red are switched ignition wires and the yellow is a constant hot wire. Cap and tape them separate from each other and you shouldn't have a problem

...6 wires. https://sparkys-answers.com/2008/12/1996-chevrolet-1500-truck-ignition.html The Images tab is the best place to look for questions like this ...

...6 cylinder, it won't start at all. Did a battery, starter, and alternator test, so I know its either the ignition switch (not the ignition lock cylinder) or the neutral safety switch, and I am ...

...6 and 7. Check the power to the neutral safety switch. When the ignition switch is activated there is no power to the neutral safety switch. Power to the neutral safety switch comes from the ignition ...

...6) Install the multi-function switch. (7) Install steering column lower cover. next the cylinder section. cylinder removal The ignition key must be in the key cylinder (1) for cylinder removal. The ...

...6 coil-ignitions, you can get it running if you force the gas through, we can not figure out what could be causing the stalling the timming is off the timming belt must be resetted. 1. do not take it ...

...be a 2 cylinder, sometimes a 4 cylinder, and other times a 6. Still not sure how that one worked, but it was the ignition switch that is located on top of the steering column down by the

...6 cylinder has no spark at all It looks like Ford integrated your ignition module into your distributor. So, aside from the ignition coil, your ignition system is self contained in the distributor. ...

6 jan 2010.Can eny one help Please. Does this happen when you turn the ignition to the 1st position or when you try to start the engine? If its when you try and start the engine then check the starter

...6 cyl ignition switch turns the starter when the battery is connected when battery is connected the ignition switch tries to start the truck Replace the switch, they have a problem that causes