1997 GMC Sonoma "clutch" Questions

getting no pressure afterinstalling clutch master cylinder I am bleeding but having trouble with fluid passing through .gravity bled with no problem also started engine to see if that would help and ...

Pulling a fan clutch assembly from a GMC 4.3 water pump? GMC sonoma, 4.3 V-6; how do I pull the fan clutch assembly from the end of the water pump shaft? First remove the fan from the clutch. There ...

gmc sonoma clutch MY CLUTCH IS WAY TO HARD WHEN I TRY IN PUT IT TO 1ST GEAR. CLUTCH PEDAL IS VERY LOOSE ASWELL.. WATS THE PROBLEM? CK BUSHINGS ON CLUTCH PEDAL, WORN OR MISSING BUSHINGS WILL CAUSE ...

when pressing the clutch it goes all the way to floor and can't change gears. Does it need new clutch or something else. Usually it is the master cylinder for the clutch. It is located on the firewall

my truck has the 5 speed and it starting to **** and slip while im giving it gas is this the clutch or the transmission? It's the clutch that is slipping. New clutch, pressure plate, and throw-out ...

...it stops about an inch from sliding in but will not . Your problem is probably that you have the clutch plate out of position and the clutch shaft is not being allowed to line up with the spigot ...

clutch not fully engaging 97 sonoma I push down on clutch and it does seem to catch completely. It does catch enough to shift gear, but rpms go up when accelerating and it accelerate slowly. A classic

gmc sonoma clutch trans. problem. i was goin down the road an came to a stop sign an pushed the clutch in an there was no clutch. got the truck home an looked thru hole in bell housing the clutch is ...

1991 GMC Sonoma manual transmission won't shift into gears, won't move, is it the clutch? Usally when the clutch is bad, you still can shift gears. Check the slave cylinder or air in the fluid line. ...