2000 Dodge Durango "labor time install control arms" Questions

labor intensive repair.The specialty tools that you need will be an air (or electric) die grinder, and an air hammer.If you already have these then GREAT!!! If not then be prepared to invest in a good

...labor hours to install new Upper and Lower Control Arms on Left & Right front of 2008 Chevrolet 1500 P/U RWD Book time is 5.6 hours for both upper and lower. Both sides. But time should be given ...

time because all the bolts and nuts are really tight". then you are gonna take out the knuckle, do that by disconnecting the lower and upper control arms , once all that is out the old axel will slide

labor at $100/hr to do it. Quoting below: "With the cross member before you, support on blocks, loosen the ball joint nut somewhat, or remove it, and with a beater protective block, sledge out the pin

...time and this is the least costly repair NOTE wen changing these do not touch bulb with bare hand as oils from your skin can cause the to heat unevenly and explode inside your headlight assembly Use ...

...labor costs to remove and re-install a new one. At times the no heat problem on Jeeps is that at one point or another, someone dumped a form of Stop-Leak into your cooling system. NEVER do that for ...

...labor. They believed the car had been wrecked or similar, & that was causing them to go bad. The bearings installed were the correct ones. Reviewed all records from original owner, none indicated ...

labor charge to retrieve the code with their diagnostic tool. Confirm price ahead of time. 5. Look on keyless entry module for the tag with the code. For 1994 town car, module is behind glvoe box. Not

time. A shimmy, however, is often associated with worn ball joints. Not quite as common on a car this age, but definitely something you want to check out and take care of ASAP. For this car, they don&

...labor and will install a new one for free! Ford has extended the warranty to 15 years/250,000 miles. THIS IS NOT A RECALL! They do not advertise this. Your regular headlights must not be working ...