2000 Dodge Durango "intake manifold fix sensor" Questions

...on the left front top side of the intake manifold and is very easy to swap out plus it's relatively inexpensive. I acn fix it just finished one that took awhile but found the problem ...

...intake manifold, and check fuel injectors. Its a process of elemination. start with buying a haynes manual @discount-that helps u in not becoming a parts replacer and while u r there ask for a free ...

...intake manifold. knock sensor is under lower intake manifold. But do not ever replace it. It won't fix anything. It is a passive sensor that goes back to zero after any spark knock event. It would be ...

intake manifold or intake plenum and mounted to the block. They are circular and have a bolt at the center. On V6s,8s etc. and flat styled motors, they will have two knock sensors (bank 1 and 2). Bank

...intake manifold gasket gone? ive spent almost 800 trying to fix this and im on my 2nd shop. want my truck back. she's a nice looking paperweight, but not what im looking for...... Something is ...

...Usually found near the throttle body in the air intake duct or attached to the intake manifold.--cause most likely a dirty or failed MAP sensor this link explains more ...

...intake manifold. Pulled the monifold, reglued end-cap and put back in truck. STILL died after idleing for 10 minutes. Code PO320 kept coming up ( crankshaft sensor) researched it and found a bad ...

...BANK 2 COULD BE MANY THINGS THAT CAUSE THAT PROBLEM.FAULTY EGR VALVE FAULTY MASS AIR FLOW SENSOR OR BAD COOLANT SENSOR BAD O2 SENSORS.LEAKING INTAKE MANIFOLD LEAKING EXHAUST PIPE OR EXHAUST

...fix a knox sensor on a 2003 chevy silverado HD 2500 6.0 litre It has two of them. Sorry to say that they are under the intake manifold and you must remove the intake manifold to gain access to

intake manifold torque sequence.need to reinstall intake manifold after replacing the knock sensors. Need torque in ft. lbs. and bolt sequence. Thank you! Fix your car right away, by clicking the link