2001 Volkswagen GTI "causes tail lights work pull" Questions

...tail light does not work I drive a 2001 VW Golf GTI. Ok I got pulled over for my left rear running light being out... I changed it and the new bulb didn't work. I tried another... Nothing. I checked ...

...tail, and dash lights are all operated by the headlight switch, no relation to the turn signals and flasher relay. Or do you mean the left indicator light on the dash? That would make me think the ...

Tail lights & dash lights not working on 1994 jeep cherokee I checked all fuses and all are fine. I then fiddled with the headlight switch and noticed that I can get the tail lights and dash lights to

...tail lights wont work on my explorer but brake and turn signals do and cant figure out why can someone help pull the bulb and check for power to the bulb socket if there is power replace the bulb ...

...causes the fuse to blow. Let's suppose its the RH tail light assembly. Pull it off the car and check for dirt and damaged wiring. If this is an older vehicle, there may be wiring damage (due to rust) ...

tail lights. pell open the inside covers and get to the tail light to inspect for this. also check those bulbs just in case they did go bad. any condensation in the light? not sure if the Impala has a

...tail lights and dash light doesn't work. I replaced the fuse, and as soon as i put the fuse in, it blows immediatley. What can cause this? Please help. Check around the tail lights for rust. There is ...

...lights/ tail lights/ lic plate light didn't work. I checked and changed the fuses in car/ under hood. I checked and changed the tail lights in the back. Replaced the break switch. Then pulled at the ...

Tail lights acting insane? We had the same issue with our 2000 Pontiac Montana. Brake lights, turn signal lights, running lights, back-up lights and emergency flasher didn?t work at all or operated at

tail lights when you take them off of the rig. do you have to unplug a wiring harness and take 2 screws out? and pull the black plastic peice out and the lights push in. that is the board i am talking