2000 Mazda 626 "front axle" Questions

Ad

Question about Mazda 626

1 Answer

Hi, The front end of my mazda clunks real bad and loud, while turning the wheel at any speed. Both directions. Help! Check boots on CV joints for tears. Torn boots result in CV wearing out. The boots ...

Ad

Question about Mazda 626

1 Answer

...front axle nut with the 32mm socket. Remove the front wheel. Jack up the car and support it on jack-stands. Remove the brake calipers and tie it up to the strut-spring. (Check your engine mount, ...

Ad

...front axle be exchanged from a 02 mazda 626 to a 97 mazda 626? Looking at ordering the CV joint it's all the same parts, I just want to be sure the full assembly will mount the same. You install a ...

left front tire is making a clicking noise when accelerating just changed axles sounds like the bearings in the axle all it takes is one mess up to knock one of those little bearing out .

front drive axles pop when turning and steering wheel shakes You have one of your constant-velocity joints failing. There are 4 on your car, two left and two right. Each has a short "drive shaft" ...

Question about Mazda 626

2 Answers

...axle. This is the drain plug. The second is on the front drivers side of the transmission. You have to park the vehicle on level ground and remove the front plug. fill the transmission with gear oil ...

Question about Mazda 626

1 Answer

...front cv axles out of mazda 626 2000 ive got the outer part of the axle loose from the spindal side but cant get the inner loose from trans help please First put a jackstand under the car have it ...

...front driver side when turning and or body shifting Your Constant velocity joints have gone bad. the Boot that holds th grease has leaked out all the grease and the bearing inside are not being ...

front wheel. Is there a chain in trans? If there is..Almost sounds like it is stretched? or jumping a few teeth when stressed or accelerating from a stop. Axle problem? Could be your CV joint, on that

Question about Mazda 626

1 Answer

Front end is off ground and supported. After removing drivers side axle shaft, I replaced it with a new one and while installing it turned it a little (enough to move wheel on passenger side). Am I in

Not finding what you are looking for?
2000 Mazda 626 Logo

640 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Mazda 626
1999 Mazda 626

544 Questions

1998 Mazda 626
1998 Mazda 626

356 Questions

1995 Mazda 626
1995 Mazda 626

269 Questions

1997 Mazda 626
1997 Mazda 626

277 Questions

2001 Mazda 626
2001 Mazda 626

227 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...